The socket-port parameter for netconfd-pro

specifies the TCP port number to listen on
when the socket-type parameter is set to "tcp".

The socket-port parameter is ignored if the
socket-type parameter is set to "aflocal",
which is the default socket-type.

The default value for the socket-port parameter is 2023.

Note: The socket-port parameter specifies the port
number for internal <ncx-connect> protocol
messages. The server will accept NETCONF
sessions over SSH, specified with the port
parameter (e.g. 830).


The socket-port parameter can be invoked

via the command line:


user@system>netconfd-pro --socket-port=22


or configured in the /etc/yumapro/netconfd-pro.conf file:


#### leaf socket-port
#
# Specifies the TCP port number to listen on when the
# socket-type parameter is set to 'tcp'. Ignored if the
# socket-type is 'aflocal'. The default is 2023.
#
# Note that this parameter specifies the port number for
# internal <ncx-connect> protocol messages.  The server
# will accept NETCONF sessions over SSH, specified with
# the 'port' parameter (e.g. 830 or 22).
#
# socket-port 2023 

socket-port 22